Rajiv Mishra

University Distinguished Research Professor
Discovery Park C136F
940-565-2316
Rajiv.Mishra@unt.edu
Faculty Profile | Website | Google Scholar |
  • Biography
    • Ph.D., Metallurgy (1988), University of Sheffield, UK, with Brunton Medal.
           “The Influence of Microstructure on the Diffusional Creep of Alloys”
            Faculty Advisors: Professor G. W. Greenwood and Professor H. Jones
    • M.Tech., Metallurgical Eng. (1985), Indian Institute of Technology, Kanpur, India.
            “Superplasticity in Al-Zn eutectoid and Pb-Sn eutectic alloys”
            Faculty Advisor: Professor G. S. Murty
    • Bachelor of Engineering, Metallurgical Engineering (1982)
            University of Rajasthan, Jaipur, India.
  • Research
    • Friction stir welding and processing
    • Processing and properties of ultrafine grained materials (including nanocrystalline)
    • Superplastic forming
    • High temperature mechanical behavior of materials (particularly creep and superplasticity)
    • Discontinuously reinforced aluminum composites
    • Nanophase aluminum alloys
    • Bulk metallic glasses
    • Materials selection for alternative energy systems
    • Hydrokinetic energy
  • Publications

    Refereed Journals   Conference Proceedings
    2010 2002 1994   2009 2000  
    2009 2001 1993   2008 1999  
    2008 2000 1992   2007 1998  
    2007 1999 1991   2005 1997  
    2006 1998 1990   2004 1996  
    2005 1997 1989   2003 1995  
    2004 1996 1988   2002 1994  
    2003 1995 1987   2001 1993  

    Citation Information

     

    Refereed Journals

    2010 back to top

    1. Jana, S., Mishra, R.S., Baumann, J.B., Grant, G., "Effect of friction stir processing on fatigue behavior of an investment cast Al-7Si-0.6 Mg alloy," (2010) Acta Materialia 58 (3), pp. 989-1003.
    2. Bhargava, G., Yuan, W., Webb, S.S., Mishra, R.S., "Influence of texture on mechanical behavior of friction-stir-processed magnesium alloy," (2010) Metallurgical and Materials Transactions A 41 (1), pp. 13-17.
    3. Freeney, T.A., Mishra, R.S., "Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a Cast-Magnesium-Rare Earth Alloy," (2010) Metallurgical and Materials Transactions A 41 (1) pp. 73-84.

    2009 back to top

    1. Jana, S., Mishra, R.S., Baumann, J.B., Grant, G., "Effect of stress ratio on the fatigue behavior of a friction stir processed cast Al-Si-Mg alloy," (2009) Scripta Materialia 61 (10), pp. 992-995.
    2. Rodelas, J., Hilmas, G., Mishra, R.S., "Sinterbonding cobalt-cemented tungsten carbide to tungsten heavy alloys," (2009) International Journal of Refractory Metals and Hard Materials 27 (5), pp. 835-841.
    3. Hatamleh, O., Mishra, R.S., Oliveras, O., "Peening effects on mechanical properties in friction stir welded AA 2195 at elevated and cryogenic temperatures," (2009) Materials and Design 30 (8), pp. 3165-3173.
    4. Dutta, A., De, P.S., Mishra, R.S., Watson, T.J., "Deformation behavior of an ultrafine-grained Al-Ni-Y-Co-Sc alloy," (2009) Materials Science and Engineering A 513-514 (C), pp. 239-246.
    5. Mishra, R.S., "Dislocation-particle interaction at elevated temperatures," (2009) JOM 61 (2), pp. 52-55.
    6. Dixit, V., Mishra, R.S., Lederich, R.J., Talwar, R., "Influence of process parameters on microstructural evolution and mechanical properties in friction stirred Al-2024 (T3) alloy," (2009) Science and Technology of Welding and Joining 14 (4), pp. 346-355.
    7. García-Bernal, M.A., Mishra, R.S., Verma, R., Hernández-Silva, D., "High strain rate superplasticity in continuous cast Al-Mg alloys prepared via friction stir processing," (2009) Scripta Materialia 60 (10), pp. 850-853.
    8. Balasubramanian, N., Mishra, R.S., Krishnamurthy, K., "Friction stir channeling: Characterization of the channels," (2009) Journal of Materials Processing Technology 209 (8), pp. 3696-3704.
    9. Ma, Z.Y., Mishra, R.S., Liu, F.C., "Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy," (2009) Materials Science and Engineering A. 505 (1-2), pp. 70-78.
    10. De, P.S., Mishra, R.S., Smith, C.B., "Effect of microstructure on fatigue life and fracture morphology in an aluminum alloy," (2009) Scripta Materialia, 60 (7), pp. 500-503.
    11. Balasubramanian, N., Gattu, B., Mishra, R.S., "Process forces during friction stir welding of aluminium alloys," (2009) Science and Technology of Welding and Joining 14 (2), pp. 141-145.
    12. Ross, N.C., Mishra, R.S., Senkov, O.N., Miracle, D.B., "Observation of Shear Thickening during Compressive Flow of Mg54Y11Ag7Cu28 in the Supercooled Liquid Region," (2009) Metallurgical and Materials Transactions A, 40, pp. 1-3.

    2008 back to top

    1. Wang, Y., Mishra, R.S., Watson, T.J., "Mechanical behavior of devitrified ultrafine-grained Al-4.0Y-4.0Ni-0.9Co matrix composites," (2008) Scripta Materialia, 59 (10), pp. 1079-1082.
    2. Shi, X.L., Mishra, R.S., Watson, T.J., "Effect of temperature and strain rate on tensile behavior of ultrafine-grained aluminum alloys", (2008) Materials Science and Engineering A, 494 (1-2), pp. 247-252.
    3. De, P.S., Obermark, C.M., Mishra, R.S., "Development of a reversible bending fatigue test bed to evaluate bulk properties using sub-size specimens," (2008) Journal of Testing and Evaluation, 36 (4), pp. 402-405.
    4. Mishra, R.S. Preface to the Viewpoint Set on friction stir processing (2008) Scripta Materialia, 58 (5), pp. 325-326.
    5. Colligan, K.J., Mishra, R.S. A conceptual model for the process variables related to heat generation in friction stir welding of aluminum (2008) Scripta Materialia, 58 (5), pp. 327-331.
    6. Charit, I., Mishra, R.S. Abnormal grain growth in friction stir processed alloys (2008) Scripta Materialia, 58 (5), pp. 367-371.
    7. Sharma, S.R., Mishra, R.S. Fatigue crack growth behavior of friction stir processed aluminum alloy (2008) Scripta Materialia, 59 (2008) 395–398.
    8. Dixit, M., Mishra, R.S., Sankaran, K.K. Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys (2008) Materials Science and Engineering A, 478 (1-2), pp. 163-172.

    2007 back to top

    1. V. Dixit, R. S. Mishra, R. J. Lederich and R. Talwar, "Effect of initial temper on mechanical properties of friction stir welded Al-2024 alloy," Science and Technology of Welding and Joining, 12 (2007) 334-40.
    2. L.B. Johannes, I. Charit, R.S. Mishra and Ravi Verma, "Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum," Materials Science and Engineering A 464 (2007) 351–357.
    3. L.B. Johannes and R.S. Mishra, "Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum," Materials Science and Engineering A, 464 (2007) 255–260.
    4. Y. Wang and R.S. Mishra, "Finite element simulation of selective superplastic forming of friction stir processed 7075 Al alloy," Materials Science and Engineering A, 463 (2007) 245–248.
    5. Y. Wang, X.L. Shi, R.S. Mishra and T.J. Watson, "Friction stir welding of devitrified Al–4.0Y–4.0Ni–0.9Co alloy produced by amorphous powders," Scripta Materialia, 56 (2007) 971-974.
    6. Y. Wang, X.L. Shi, R.S. Mishra and T.J. Watson, "Ductility improvement in devitrified ultrafine-grained Al–4.0Y–4.0Ni–0.9Co alloy via hot rolling," Scripta Materialia, 56 (2007) 923-925.
    7. M. Dixit, J. W. Newkirk and R. S. Mishra, "Properties of friction stir-processed Al 1100-NiTi composite," Scripta Materialia, 56 (2007) 541-4.

    2006 back to top

    1. Z. Y. Ma, S. R. Sharma and R. S. Mishra, "Microstructural Modification of As-Cast Al-Si-Mg Alloy by Friction Stir Processing," Metallurgical and Materials Transactions A. 37A (2006) 3323-3336.
    2. Z. Y. Ma, S. R. Sharma and R. S. Mishra, "Effect of friction stir processing on the microstructure of cast A356 aluminum," Materials Science and Engineering A, 433 (2006) 269-278.
    3. J. E. Spowart, A. Tewari, A. M. Gokhale, R. S. Mishra and D. B. Miracle, "Characterization of the effects of friction stir processing on microstructural changes in DRA composites," Materials Science & Engineering A, vol.428, no.1-2, 25 July 2006, pp. 80-90.
    4. L. B Johannes, L. L. Yowell, E. Sosa, S. Arepalli and R. S Mishra, "Survivability of single-walled carbon nanotubes during friction stir processing," Nanotechnology, 17 (2006) 3081-3084.
    5. Z. Y. Ma, S. R. Sharma and R. S. Mishra, "Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum-silicon alloy," Scripta Materialia, 54 (2006) 1623-1626.
    6. S. Tandon, S. R. Deshmukh, R. S. Mishra, K. Krishnamurthy, R. Tayloe, Fracture criteria prediction in wiredrawing using finite element modeling. Wire Journal International, vol.39, no.1, Jan. 2006, pp. 58-62.

    2005 back to top

    1. S. P. Deshmukh, R. S. Mishra and K. L. Kendig, „Creep behavior of extruded Al-6Mg-1Sc-1Zr-10 vol.% SiCp composite," Materials Science & Engineering A, 410 (2005) 53-57.
    2. R. S. Mishra and Z. Y. Ma, "Friction Stir Welding and Processing," Materials Science and Engineering R, 50 (2005) 1-78.
    3. I. Charit and R. S. Mishra, "Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy," Acta Materialia, 53 (2005) 4211-4223.
    4. R B. Grishaber, A. V. Sergueeva, R. S. Mishra and A. K. Mukherjee, "Laminated metal composites - High temperature deformation behavior", Materials Science & Engineering A, 403 (2005) 17-24.
    5. Z. Y. Ma and R. S. Mishra, "Development of ultrafine-grained microstructure and low temperature (0.48 Tm) superplasticity in friction stir processed Al-Mg-Zr," Scripta Materialia, 53 (2005) 75-80.
    6. S. Mohan and R. S. Mishra, "Friction stir microforming of superplastic alloys," Microsystem Technologies, 11 (2005) 226-229.
    7. Z. Y. Ma, R. S. Mishra, M. W. Mahoney and R. Grimes, "Effect of Friction Stir Processing on the Kinetics of Superplastic Deformation in an Al-Mg-Zr Alloy," Metallurgical and Materials Transactions A., 36A(2005) 1447-1458.
    8. X. L. Shi, R. S. Mishra and T. J. Watson, "Elevated temperature deformation behavior of nanostructured Al-Ni-Gd-Fe alloys," Scripta Materialia, 52 (2005) 887-891.
    9. A. Dutta, I. Charit, L. B. Johannes and R S. Mishra, "Deep cup forming by superplastic punch stretching of friction stir processed 7075 Al alloy", Materials Science & Engineering A, 395 (2005) 173-179.

    2004 back to top

    1. R. W. Hayes, P. B. Berbon and R. S. Mishra, "Microstructure characterization and creep deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu Nanocomposite," Metallurgical and Materials Transactions A., 35A(2004) 3855-3861.
    2. I. Charit and R. S. Mishra, "Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy," Journal of Materials Research, 19, (2004) 3329-3342.
    3. A. J. Kulkarni, K. Krishnamurthy, S. P. Deshmukh and R. S. Mishra, "Effect of particle size distribution on strength of precipitation-hardened alloys," Journal of Materials Research, 19 (2004) 2765.
    4. S. P. Deshmukh, R. S. Mishra and K. L. Kendig, "Creep behavior and threshold stress of an extruded Al-6Mg-2Sc-lZr alloy," Materials Science and Engineering A, 381 (2004) 381-385.
    5. S. R. Sharma, Z. Y. Ma and R. S. Mishra, "Effect of friction stir processing on fatigue behavior of A356 alloy," Scripta Materialia, 51 (2004) 237.
    6. A. Kulkarni, K. Krishnamurthy; S. P. Deshmukh and R. S. Mishra, "Microstructural optimization of alloys using a genetic algorithm," Materials Science and Engineering A., 372 (2004) 213.
    7. Z. Y. Ma, R. S. Mishra and M. W. Mahoney, "Superplasticity in cast A356 induced via friction stir processing," Scripta Materialia, 50 (2004) 931.

    2003 back to top

    1. Z. Y. Ma and R. S. Mishra, Cavitation in superplastic 7075Al alloys prepared via friction stir processing,"Acta Materialia, 51 (2003) 3551.
    2. I. Charit and R. S. Mishra, "High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing," Materials Science and Engineering A, A359 (2003) 290.
    3. Z. Y. Ma, R. S. Mishra, M. W. Mahoney, and R. Grimes, "High strain rate superplasticity in friction stir processed Al-Mg-Zr alloy," Materials Science and Engineering A, A351 (2003) 148.
    4. R. S. Mishra, Z. Y. Ma and I. Charit, "Friction stir processing: A novel technique for fabrication of surface composite," Materials Science and Engineering A, A341 (2003) 307.

    2002 back to top

    1. Z. Y. Ma, R. S. Mishra and M. W. Mahoney, "Superplastic deformation behavior of friction stir processed 7075Al alloy," Acta Materialia, 50 (2002) 4419.
    2. Z. Y. Ma, R. S. Mishra and S. C. Tjong," High-temperature creep behaviour of TiC particulate reinforced Ti-6Al-4V alloy composite," Acta Materialia, 50 (2002) 4293.
    3. I. Charit, R. S. Mishra and M. W. Mahoney, "Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming," Scripta Materialia, 47 (2002) 631.

    2001 back to top

    1. R. S. Mishra, R. Z. Valiev, S. X. McFadden, R. K. Islamgaliev and A. K. Mukherjee, "High strain rate superplasticity from nanocrystalline Al alloy 1420 at low temperatures," Philosophical Magazine A, 81(2001) 37.
    2. R.S. Mishra and A.K. Mukherjee, "Processing of high hardness-high toughness alumina matrix nanocomposites," Materials Science and Engineering, A301 (2001) 97.
    3. R. K. Islamgaliev, R. Z. Valiev, R. S. Mishra and A. K. Mukherjee, "Enhanced superplastic properties in bulk metastable nanostructured alloys," Materials Science and Engineering A, A304-A306 (2001) 206.
    4. R. S. Mishra, "Processing commercial aluminum alloys for high strain rate superplasticity," Journal of Materials, 53(3) (2001) 23.
    5. P. B. Berbon, W. H. Bingel, R. S. Mishra, C. C. Bampton and M. W. Mahoney, "Friction stir processing: a tool to homogenize nanocomposite aluminum alloys," Scripta Materialia, 44 (2001) 61.
    6. R. Z. Valiev, C. Song, S. X. McFadden, A. K. Mukherjee and R. S. Mishra, "TEM/HREM observations of nanostructured superplastic Ni3Al," Philosophical Magazine, 81A (2001) 25.
    7. R. S. Mishra, V. V Stolyarov, C. Echer, R. Z. Valiev, A. K. Mukherjee, "Mechanical behavior and superplasticity of a severe plastic deformation processed nanocrystalline Ti-6Al-4V alloy," Materials Science and Engineering, A298 (2001) 44.

    2000 back to top

    1. S.X. McFadden, A.P. Zhilyaev, R. S. Mishra and A.K. Mukherjee, "Observations of low-temperature superplasticity in electrodepositedultrafine grained nickel," Materials Letters, 45 (2000) 345.
    2. R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara, and A. K. Mukherjee, "High strain rate superplasticity in a friction stir processed 7075 al alloy," Scripta Materialia, 42 (2000) 163.
    3. R. S. Mishra and A. K. Mukherjee, "An analysis of the role of grain size on superplasticity of g titanium aluminides," Journal of Materials Science, 35 (2000) 147.
    4. Y. H. Han, R. S. Mishra, M. J. Gasch, H. B. Lee and A. K. Mukherjee, "Processing of Si3N4/SiC and boron-modified nanocomposites via ceramic precursor route," Korean Journal of Ceramics, 6 (2000), 245.
    5. S. X. McFadden, A. V. Sergueeva, R. S. Mishra and A. K. Mukherjee, "High strain rate superplasticity in microcrystalline and nanocrystalline materials," Materials Science & Technology, 16 (2000) 1340.
    6. R. S. Mishra and A. K. Mukherjee, "Electric pulse assisted rapid consolidation of ultrafine grained alumina matrix composites," Materials Science & Engineering, A287 (2000) 178.

    1999 back to top

    1. R. S. Mishra, "Designing DRA Composites for High Creep Strength," Journal Of Metals, 51(11) (1999) 65.
    2. R. S. Mishra, R. Z. Valiev, S. X. McFadden, R. K. Islamgaliev and A. K. Mukherjee, "Severe plastic deformation processing and High Strain Rate Superplasticity in an Aluminum Matrix Composite," Scripta Materialia, 40 (1999) 1151.
    3. S. X. McFadden, R. S. Mishra, R. Z. Valiev, A. P. Zhilyaev and A. K. Mukherjee, "Low temperature superplasticity in nanocrystalline nickel and metal alloys," Nature,398 (1999) 684.
    4. R. S. Mishra, V. Jayaram, B. Majumdar, C. E. Lesher and A. K. Mukherjee, "ZrO2-Al2O3 nanocomposite by high pressure sintering of spray pyrolysed powders," Journal of Materials Research, 14 (1999) 834.
    5. R. S. Mishra, S. X. McFadden, R. Z. Valiev and A. K. Mukherjee, "Deformation mechanisms and tensile superplasticity in nanocrystalline materials," Journal of Metals, 51(1) (1999) 37.

    1998 back to top

    1. R. S. Mishra, R. Z. Valiev, S. X. McFadden and A. K. Mukherjee, "Tensile Superplasticity in Nanocrystalline Nickel Aluminide" Materials Science and Engineering A, A252 (1998) 174.
    2. R. S. Mishra, R. H. Lu, R. B. Grishaber and A. K. Mukherjee, "Effect of Stressed Pre-exposure on the Creep Strengthening of a 2009Al-SiCw Composite" Scripta Materialia, 38 (1998) 1819.
    3. R. S. Mishra, S. H. Risbud and A. K. Mukherjee, "Effect of electric pulsing on densification of a and g alumina," Journal of Materials Research, 13 (1998) 86.

    1997 back to top

    1. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, "Mechanism of high strain rate superplasticity in aluminum alloy composites," Acta Metallurgica et Materialia., 45 (1997) 561.
    2. A. B. Pandey, R. S. Mishra, A. G. Paradkar and Y. R. Mahajan, "Steady state creep behaviour of an Al-Al2O3 alloy," Acta Metallurgica et Materialia, 45 (1997) 1297.
    3. R. Z. Valiev, G. F. Korznikova, K. Y. Mulyukov, R. S. Mishra and A. K. Mukherjee, "Saturation magnetization and curie temperature of nanocrystalline nickel," Philosophical Magazine B, 75 (1997) 803.

    1996 back to top

    1. T. R. Bieler, R. S. Mishra and A. K. Mukherjee, "High strain rate superplasticity in aluminum matrix composites," JOM, 48 (2) (1996) 52.
    2. A. B. Pandey, R. S. Mishraand Y. R. Mahajan, "Effect of a solid solution on the steady state creep behavior of an aluminum-matrix composite," Metall. Trans. A, 27A (1996) 305.
    3. S. Ranganath and R. S. Mishra, "Steady state creep behavior of particulate reinforced titanium matrix composites," Acta Metallurgica et Materialia, 44 (1996) 927.
    4. R. Z. Valiev, R. S. Mishra, J. Groza and A. K. Mukherjee, "Processing of nanostructured nickel by severe plastic deformation consolidation of ball milled powder," Scripta Metall. Mater., 34 (1996) 1443.
    5. R. S. Mishra, A. K. Mukherjee, D. K. Mukhopadhyay, C. Suryanarayana and F. H. Froes, "High temperature deformation behavior of a nanocrystalline titanium aluminide," Scripta Metall. Mater., 34(1996) 1765.
    6. A. B. Pandey, R. S. Mishraand Y. R. Mahajan, "Effect of isothermal heat treatment on the creep behaviour of an Al-TiCp composite," Materials Science and Engineering A, A206 (1996) 270.
    7. S. Ranganath, T. Roy and R. S. Mishra, "Microstructure and deformation of TiB+Ti2C reinforced titanium matrix composites," Materials Science and Technology, 12 (1996) 219.
    8. T. R. Bieler, R. S. Mishra and A. K. Mukherjee, "Superplasticity in hard-to-machine materials," Annual Review of Materials Science, 26 (1996) 75.
    9. R. S. Mishra, C. Echer, C. C. Bampton, T. R. Bieler and A. K. Mukherjee, "Influence of temperature on segregation in 2009 Al-SiCw composite and its implication on high strain rate superplasticity," Scripta Metall. Mater., 35 (1996) 247.
    10. R. S. Mishra, A. K. Mukherjee, K. Yamazaki and K. Shoda, "Effect of TiO2 doping on rapid densification of alumina by plasma activated sintering," J. Mater. Res., 11 (1996) 1144.
    11. R. B. Grishaber, R. S. Mishra and A. K. Mukherjee, "Effect of testing environment on intergranular microsuperplasticity in aluminum MMC," Mater. Sci. Eng., A220 (1996) 78.
    12. R. S. Mishra, C. E. Lesher and A. K. Mukherjee, "High pressure sintering of nanocrystalline g-Al2O3," J. American Ceramic Society, 79 (1996) 2989.
    13. R. Z. Valiev, R. S. Mishra and A. K. Mukherjee, "Ultra-fine grained nickel produced by severe plastic deformation," Annales de Chimie-Science des Materiaux, 21 (1996) 399.

    1995 back to top

    1. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, "Superplasticity in powder metallurgy aluminium alloys and composites," Acta Metallurgica et Materialia, 43 (1995) 877.
    2. T. K. Nandy, R. S. Mishra, A. K. Gogia and D. Banerjee, "The effect of aluminium on the creep behaviour of titanium aluminide alloys," Scripta Metallurgica et Materialia, 32 (1995) 851.
    3. V. K. Varma, R. S. Mishra, V. A. Joshi, B. V. Rao, K. K. Sharma and D. Banerjee, "Effect of heat treatment on microstructure and mechanical properties of CM247LC cast superalloy rotor," Trans. Indian Institute of Metals, 48 (1995) 69.
    4. D. M. Farkas, R. S. Mishra and A. K. Mukherjee, "Instantaneous strain measurements during high temperature stress cycling of a dispersion-strengthened niobium alloy," Scripta Metallurgica et Materialia, 32 (1995) 1725.
    5. R. S. Mishra, S. P. Singh, A. M. Srirammurthy and M. C. Pandey, Effect of grain boundary orientation on creep behaviour of a directionally solidified CM 247 LC Alloy," Materials Science and Technology, 11(1995) 341.
    6. R. S. Mishra, J. Schneider, J. F. Shackelford and A. K. Mukherjee, "Plasma activated sintering of nanocrystalline g-Al2O3," NanoStructured Materials, 5 (1995) 525.
    7. R. S. Mishra, A. B. Pandey, K. S. Prasad and A. K. Mukherjee, "Microstructure of a creep tested Al-20 vol.% SiC composite," Scripta Metallurgica et Materialia, 33 (1995) 479.
    8. R. S. Mishra, A. B. Pandey and A. K. Mukherjee, "An evaluation of steady state creep mechanism in an Al-Mg/26 Al2O3f composite, Materials Science and Engineering A, 201 (1995) 205.

    1994 back to top

    1. R. S. Mishra, T. K. Nandy and G. W. Greenwood, "The threshold stress for dislocation-particle interaction controlled creep," Philosophical Magazine A, 69 (1994) 1097.
    2. R. S. Mishra and D. Banerjee, "Transient mechanisms in diffusional creep in a titanium aluminide," Scripta Metallurgica et Materialia, 31 (1994) 1555.
    3. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "High temperature creep of Al-TiB2 particulate composites," Materials Science and Engineering A, A189 (1994) 95.

    1993 back to top

    1. T. K. Nandy, R. S. Mishra and D. Banerjee, "Creep behaviour of an orthorhombic phase in a Ti-Al-Nb alloy," Scripta Metallurgica et Materialia, 27 (1993) 569.
    2. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Creep fracture in Al-SiC composites," Journal of Materials Science, 28 (1993) 2943.
    3. R. S. Mishra, A. G. Paradkar and K. N. Rao, "Steady state creep behaviour of a rapidly solidified and further processed Al-5 wt% Ti alloy," Acta Metallurgica et Materialia, 41 (1993) 2243.
    4. R. S. Mishra, A. K. Singh and T. Roy, "Creep of an AlCoCu Quasicrystal," Philosophical Magazine Letters, 68 (1993) 225.
    5. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "On the anomalous creep behaviour of a XD Al-TiB2 composite," Scripta Metallurgica et Materialia, 29 (1993) 1199.

    1992 back to top

    1. R. S. Mishra, "Dislocation creep mechanism map for dispersion strengthened materials," Scripta Metallurgica et Materialia, 26 (1992) 309.
    2. D. K. Das, A. G. Paradkar and R. S. Mishra, "Microstructure and creep behaviour of laser surface alloyed Al-Ni alloy," Scripta Metallurgica et Materialia, 26 (1992), 1211.
    3. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, "On the superplasticity of mechanically alloyed aluminium alloys," Scripta Metallurgica et Materialia, 26 (1992), 1605.
    4. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Steady state creep behaviour of silicon carbide particulate reinforced aluminium alloys," Acta Metallurgica et Materialia, 40 (1992), 2045.
    5. A. G. Paradkar, K. N. Rao, P. V. Rao and R. S. Mishra, "Microstructural characterization of rapidly solidified Al-Fe-MM alloy with Mg addition," International Journal of Rapid Solidification, 7 (1992), 167.

    1991 back to top

    1. R. S. Mishra and A. K. Mukherjee, "On the superplasticity in silicon carbide reinforced aluminium composites," Scripta Metallurgica, 25 (199l) 271.

    1990 back to top

    1. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of a low carbon steel at low stresses and intermediate temperatures," Acta Metallurgica, 38 (1990) 461.
    2. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of a rapidly solidified and further processed Al-Cr-Zr alloy," Int. J. Rapid Solidification, 5 (1990) 149.
    3. R. S. Mishra, H. Jones and G. W. Greenwood, "Creep of Pb-2.5Sb-0.2Sn alloy at low stresses," Materials Science and Technology, 6 (1990) 504.
    4. R. K. Singh and R. S. Mishra, "Influence of minor additions of Zr on the mechanical behaviour of a Mg-Li-Al alloy," Scripta Metallurgica, 24 (1990) 451.
    5. R. S. Mishra and A. B. Pandey, "Some observations on the high-temperature creep behaviour of 6061 Al-SiC composites," Metallurgical Transactions A, 21A (1990) 2089.
    6. R. S. Mishra and D. Banerjee, "On the influence of cooling rate in solution treatment for a Ti-25Al-llNb alloy," Scripta Metallurgica, 24 (1990) 1477.
    7. A. B. Pandey, R. S. Mishra and Y. R. Mahajan, "Creep behaviour of an aluminium-silicon carbide particulate composite," Scripta Metallurgica, 24 (1990) 1565.
    8. R. S. Mishra and D. Banerjee, "Microstructure and steady state creep in Ti-24Al-llNb," Materials Science and Engineering, A130 (1990) 151.

    1989 back to top

    1. R. S. Mishra, H. Jones and G. W. Greenwood, "Some correlations between parameters relating to grain boundary self diffusion in silver," Materials Science and Engineering A, 117 (1989) L21.
    2. R. S. Mishra, H. Jones and G. W. Greenwood, "An analysis of low stress creep data for coarse-grained pure lead," Materials Letters, 8 (1989) 187.
    3. R. S. Mishra, H. Jones and G. W. Greenwood, "On the threshold stress for diffusional creep in pure metals," Philosophical Magazine A, 60 (1989) 581.

    1988 back to top

    1. R. S. Mishra and G. S. Murty, "The Stress-strain rate behaviour of superplastic Zn-Al eutectoid alloy," J. Materials Science, 23 (1988) 593.
    2. R. S. Mishra and G. S. Murty, "Effect of concurrent grain growth on the stress-strain rate curve of superplastic materials," J. Materials Science Letters, 7 (1988) 185.
    3. R. S. Mishra, H. Jones and G. W. Greenwood, "Enhanced diffusional creep: The effect of grain growth," Scripta Metallurgica, 22 (1988) 323.
    4. R. S. Mishra, H. Jones and G. W. Greenwood, "An empirical correlation for the grain boundary diffusion of impurities in copper," J. Materials Science Letters, 7 (1988) 728.

    1987 back to top

    1. A. O. Sepulveda and R. S. Mishra, "An analysis of grain-growth data in duplex materials on static annealing and during superplastic deformation," J. Materials Science, 22 (1987) 2153.

    Conference Proceedings

    2009 back to top

    1. Kumar, N., Rodelas, J., Mishra, R.S., "The effects of friction stir processing on the microstructural evolution and mechanical properties of Ti-6A1-4V alloy," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 45-53.
    2. Yuan, W., Rodelas, J.M., Mishra, R.S., "Friction stir welding of dual phase steel," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 113-121.
    3. Miles, M.P., Smith, C., Opichka, J., Cerveny, L., Mahoney, M., Mohan, A., Mishra, R.S., "Bending limits in friction stir processed 5083 aluminum plate," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 135-140.
    4. Rodelas, J., Mishra, R.S., Hilmas, G., Yuan, W., "Mechanical evaluation of friction stir spot welded advanced high strength steels," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 171-179.
    5. Gupta, K., Mishra, R.S., Chen, Y.L., Carlson, B., Gayden, X.Q., "Friction stir form welding of aluminum tubes," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 191-203.
    6. Yuan, W., Mishra, R.S., Webb, S.S., Chen, Y.L., Gayden, X.Q., Carlson, B., Grant, G.J., "Friction stir spot welding of AA6016 aluminum alloy," Friction Stir Welding and Processing IV, 2009 TMS Annual Meeting; San Francisco, CA, pp. 205-214.

    2008 back to top

    1. Tipaji, P.K., Allada, V., Mishra, R., "A cost model for the Metal Inert Gas (MIG) welding process", (2008) 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, 4, pp. 751-760.
    2. Balasubramanian, N., Krishnamurthy, K., Mishra, R.S., "Preliminary study of pressure drop and heat transfer through a friction stir channel," (2008) ASME International Mechanical Engineering Congress and Exposition, Proceedings, 8 PART A, pp. 933-940

    2007 back to top

    1. P. Kalya, K. Krishnamurthy, R. S. Mishra and J. Baumann, "Specific Energy and Temperature Mechanistic Models for Friction Stir Processing of Al–F35," Friction Stir Welding and Processing IV, 2007 TMS Annual Meeting; Orlando, FL, 2007, 113-126.
    2. M. Yadava, R. S. Mishra, Y.L. Chen, X.Q. Gayden and G. Grant, "Friction Stir Lap Welds of AA6111 Aluminum Alloy," Friction Stir Welding and Processing IV, 2007 TMS Annual Meeting; Orlando, FL, 2007, 203-212.
    3. R. S. Mishra, S. Webb, T. Freeney, Y.L. Chen, X.Q. Gayden, G. Grant, and D. Herling, "Friction Stir Spot Welding of 6016 Aluminum Alloy," Friction Stir Welding and Processing IV, 2007 TMS Annual Meeting; Orlando, FL, 2007, 341-348.
    4. T. Freeney, R. S. Mishra, G. Grant, and R. Verma, "Friction Stir Processing of a Cast WE43 Magnesium Alloy," Friction Stir Welding and Processing IV, 2007 TMS Annual Meeting; Orlando, FL, 2007, 429-438.
    5. S. Jana, R. S. Mishra, H. N. Chou, and D. Herling, "Friction Stir Microstructural Modification of Investment Cast F357," Friction Stir Welding and Processing IV, 2007 TMS Annual Meeting; Orlando, FL, 2007, 439-448.

    2005 back to top

    1. S.P. Deshmukh and R.S. Mishra, "Effect of Stress State on Primary Creep Behavior of PM Al-Mg-Sc-Zr-SiCp Composite," Creep Deformation and Fracture, Design, and Life Extension, Materials Science & Technology 2005 Conference held in Pittsburgh, Pa., September 25–28, 2005, 87-96.
    2. L. B. Johannes, I. Charit and R. S. Mishra, "High strain rate superplastic properties of 7075 aluminum via friction stir processing," Friction Stir Welding and Processing III, 2005 TMS Annual Meeting; San Francisco, CA, 2005, 123-130.

    2004 back to top

    1. I. Charit and R. S. Mishra, "Ultrafine grained aluminum alloys via friction stir processing," Ultrafine Grained Materials III, Charlotte, NC, 2004, 95.
    2. I. Charit, Z. Y. Ma and R. S. Mishra, "High strain rate superplasticity in aluminum alloys via friction stir processing," Advances in Superplasticity and Superplastic Forming Symposium, Charlotte, NC, 2004, 201.

    2003 back to top

    1. Z. Y. Ma, R. S. Mishra, and M.W. Mahoney, "Friction stir processing for microstructural modification of an aluminum casting," Friction Stir Welding and Processing II, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and T. Lienert, TMS, 2003, 221.
    2. S. R. Sharma, R. S. Mishra, J. A. Baumann, R.J. Lederich and R. Talwar, "Microstructural characterization of a FSW 7050 Al alloy," Friction Stir Welding and Processing II, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and T. Lienert, TMS, 2003, 209.
    3. J. E. Spowart, Z. Y. Ma and R. S. Mishra, "The effect of friction stir processing (FSP) on the spatial heterogeneity of discontinuously-reinforced aluminum (DRA) microstructures," Friction Stir Welding and Processing II, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and T. Lienert, TMS, 2003, 243.
    4. M. P. Miles, M. W. Mahoney, T. W. Nelson and R. S. Mishra, "Finite element simulation of plane-strain thick plate bending of friction-stir processed 2519 aluminum," Friction Stir Welding and Processing II,Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and T. Lienert, TMS, 2003, 253.
    5. I. Charit, Z. Y. Ma and R. S. Mishra, "Microstructural refinement and control in friction stir processed aluminum alloys for superplasticity," Hot Deformation of Aluminum Alloys III, TMS, 2003, 331.
    6. Z. Y. Ma and R. S. Mishra, "Friction stir surface composite fabrication," Surface Engineering: in Materials Science II, TMS, 2003, 243.

    2002 back to top

    1. Z. Y. Ma and R. S. Mishra, "Is transition-based approach better for interpretation of dislocation creep mechanisms in dispersion-strengthened materials?" Creep Deformation: Fundamentals and Applications, Eds. R. S. Mishra, J. Earthman and S. V. Raj, TMS, 2002, 219.

    2001 back to top

    1. W. C. Chen, D. E. Ferguson, H. S. Ferguson, R. S. Mishra and Z. Jin, "Development of ultrafine grained materials using the MAXStrain (R) technology," Superplasticity In Advanced Materials, ICSAM-2000 Materials Science Forum, 357-3 (2001) 425.
    2. R. S. Mishra and M. W. Mahoney, "Friction stir processing: A new grain refinement technique to achieve high strain rate superplasticity in commercial alloys,"Superplasticity In Advanced Materials, ICSAM-2000 Materials Science Forum, 357-3 (2001) 507.
    3. S. R. Sharma, R. S. Mishra, M. W. Mahoney and K. V. Jata, "Mechanical behavior of friction stir welded powder metallurgy aluminum alloys and composites," Friction Stir Welding and Processing, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and D. P. Fields, TMS, 2001, 151.
    4. M. Mahoney, R. S. Mishra, T. Nelson, J. Flintoff, R. Islamgaliev and Y. Hovansky, "High strain rate, thick section superplasticity created via friction stir processing," Friction Stir Welding and Processing, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and D. P. Fields, TMS, 2001, 183.
    5. R. S. Mishra, R. K. Islamgaliev, T. W. Nelson, Y. Hovansky and M. W. Mahoney, "Abnormal grain growth during high temperature exposure in friction stir processed 7050 and 2519 aluminum alloys," Friction Stir Welding and Processing, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and D. P. Fields, TMS, 2001, 205.
    6. I. Charit, R. S. Mishra and K. V. Jata, "Superplastic behavior of friction stir processed aluminum-lithium alloy," Friction Stir Welding and Processing, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and D. P. Fields, TMS, 2001, 225.
    7. J. Zheng, R. S. Mishra, P. B. Berbon and M. W. Mahoney, "Microstructure and mechanical behavior of friction stir processed Al-Ti-Cu alloy," Friction Stir Welding and Processing, Eds. K. V. Jata, M. W. Mahoney, R. S. Mishra, S. L. Semiatin and D. P. Fields, TMS, 2001, 235.

    2000 back to top

    1. S. X. McFadden, R. S. Mishra and A. K. Mukherjee, "Recent developments in superplasticity", Superplasticity - Current Status and Future Potential, Editors: P. B. Berbon, M. Z. Berbon, T. Sakuma, T. G. Langdon, (Mater. Res. Soc., Warrendale, PA 2000) 153.
    2. R. S. Mishra, "An evaluation of the applicability of theoretical models for elevated temperature plasticity to ultrafine grained materials", Ultrafine Grained Materials, Editors: R. S. Mishra, S. L. Semiatin, C. Suryanarayana, N. N. Thadhani, and T. C. Lowe, (TMS, Warrendale, PA, 2000) 421.
    3. R. S. Mishra, "Effects of microstructural scale on high temperature plasticity of dispersion strengthened materials and composites", Deformation, Processing, and Properties of Structural Materials, Editors: E. M. Taleff, C. K. Syn, and D. R. Lesner, (TMS, Warrendale, PA, 2000) 277.

    1999 back to top

    1. R. S. Mishra, S. X. McFadden and A. K. Mukherjee, "Analysis of tensile superplasticity in nanomaterials," Materials Science Forum, 304-306, (1999) 31.
    2. R. S. Mishra and A. K. Mukherjee, "Primary creep and anelasticity at low stresses," in Creep Behavior of Advanced Materials for the 21st Century, Edited by R. S. Mishra, A. K. Mukherjee and K. L. Murty, The Minerals, Metals & Materials Society, 1999, p503.

    1998 back to top

    1. R. S. Mishra and A. K. Mukherjee, "Superplasticity in nanomaterials," in Superplasticity and Superplastic Forming 1998, Edited by A. K. Ghosh and T. R. Bieler, The Minerals, Metals and Materials Society, 1998, p109.
    2. S. X. McFadden, R. S. Mishra, and A. K. Mukherjee, "Observations of superplasticity in nanocrystalline matrix," The Third Pacific Rim International Conference on Advanced Materials and Processing (PRICM-3), Edited by M. A. Imam, et al., The Minerals, Metals & Materials Society, 1998, p1733.
    3. R. Z. Valiev, R. K. Islamgaliev, V. V. Stolyarov, R. S. Mishra and A. K. Mukherjee, "Processing and mechanical properties of nanocrystalline alloys prepared by severe plastic deformation," Materials Science Forum, 269-272 (1998) 969.
    4. V. Jayaram, R. S. Mishra, B. Majumdar, C. E. Lesher and A. K. Mukherjee, "Dense nanometric ZrO2-Al2O3 from spray pyrolysed powders," Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 133 (1998) 25.

    1997 back to top

    1. R. Z. Valiev, I. V. Alexandrov, W. A. Chiou, R. S. Mishra and A. K. Mukherjee, "Comparative structural studies of nanocrystalline materials processed by different techniques," Materials Science Forum, 235-238 (1997) 497.
    2. R. S. Mishra, A. K. Mukherjee, D. K. Mukhopadhyay, C. Suryanarayana and F. H. Froes, "Flow behavior of a mechanically alloyed and hipped nanocrystalline g-TiAl," Advances in Science and Technology of Titanium Alloy Processing, edited by I. Weiss, R. Srinivasan, P. Bania, D. Eylon and S. L. Semiatin, TMS, Warrendale, 1997, 405.
    3. R. S. Mishra, R. Z. Valiev and A. K. Mukherjee, "The observation of tensile superplasticity in nanocrystalline materials," NanoStructured Materials, 9 (1997) 473.
    4. A. K. Mukherjee, R. S. Mishra and T. R. Bieler, "Some critical aspects of high strain rate superplasticity," Materials Science Forum, 233-234 (1997) 217.
    5. R. S. Mishra and A. K. Mukherjee, "The origin of high strain rate superplasticity," Materials Science Forum, 243-245 (1997) 315.
    6. A. K. Mukherjee and R. S. Mishra, "Superplasticity in intermetallics," Materials Science Forum, 243-245 (1997) 609.
    7. R. S. Mishra and A. K. Mukherjee, "Role of diffusional relaxation in fracture of dispersion strengthened materials during creep and superplasticity," Recent Advances in Fracture, edited by R. K. Mahidhara, A. B. Geltmacher, P. Matic and K. Sadananda, TMS, Warrendale, (1997) 285.
    8. R. S. Mishra and A. K. Mukherjee, "Primary creep in aluminum matrix composites,"Creep and Fracture of Engineering Materials and Structures, edited by J. C. Earthman and F. A. Mohamed, TMS, Warrendale, 1997, 237.
    9. R. S. Mishra and A. K. Mukherjee, "The rate controlling mechanism in high strain rate superplasticity," Materials Science and Engineering, A234-236 (1997)1023.

    1996 back to top

    1. R. S. Mishra, C. E. Lesher and A. K. Mukherjee, "High pressure consolidation of ‘nano-nano’ alumina composites," Synthesis and Processing of Nanocrystalline Powder, edited by D. Bourell, TMS/FEMS, Warrendale, 1996, p173.
    2. R. S. Mishra and A. K. Mukherjee, "Primary creep in dispersion strengthened materials," Symposium Dedicated to Professor Johannes Weertman’s Seventieth Birthday, edited by R. J. Arsenault, D. Cole, T. Gross, H. Sizek, P. Liaw, S. Parameswaran and G. Kostorz, TMS, Warrendale, 1996, p189.
    3. A. K. Mukherjee and R. S. Mishra, "Creep mechanisms in dispersion strengthened materials," Symposium Dedicated to Professor Johannes Weertman’s Seventieth Birthday, edited by R. J. Arsenault, D. Cole, T. Gross, H. Sizek, P. Liaw, S. Parameswaran and G. Kostorz, TMS, Warrendale, 1996, p119.
    4. J. A. Schneider, R. S. Mishra and A. K. Mukherjee, "Plasma activated sintering of ceramic materials," Advanced Synthesis and Processing of Composites and Advanced Ceramics II, edited by R. Spriggs, Z. Munir and K. Logan, 1996, p 143.
    5. R. S. Mishra, R. Z. Valiev and A. K. Mukherjee, "Fully dense nanocrystalline nickel by severe plastic deformation consolidation," Materials Science Forum, 225-227 (1996) 605.
    6. R. S. Mishra, D. A. West and A. K. Mukherjee, "Flow behavior of partially dense nanocrystalline alumina," Materials Science Forum, 225-227 (1996) 611.
    7. R. S. Mishra, C. E. Lesher and A. K. Mukherjee, "Nanocrystalline alumina by high pressure sintering,"Materials Science Forum, 225-227 (1996) 617.
    8. R. B. Grishaber, R. S. Mishra and A. K. Mukherjee, "Mechanical behavior and constitutive modeling during high temperature deformation of Al laminated metal composites," Layered Materials for Structural Applications, edited by J. J. Lewandowski, C. H. Ward, M. R. Jackson, W. H. Hunt, Jr., Mater. Res. Soc. Pittsburgh, PA, USA, (1996) 267.

    1995 back to top

    1. R. S. Mishra, D. Banerjee and A. K. Mukherjee, "Primary creep in a Ti-25 Al-11 Nb alloy," Materials Science and Engineering A, A192/193 (1995) 756.
    2. R. S. Mishra, D. Banerjee and A. K. Mukherjee, "Surface cracking during creep of a Ti-25 Al-11 Nb alloy," Materials Science and Engineering A, A192/193 (1995) 763.
    3. R. S. Mishra and A. K. Mukherjee, "The influence of volume fraction of second phase dispersoids on activation energy for high strain rate superplasticity in aluminum alloys," in Superplasticity and Superplastic Forming 1995, Edited by A. K. Ghosh and T. R. Bieler, The Minerals, Metals and Materials Society, 1995, p171.
    4. R. S. Mishra and A. K. Mukherjee, "Creep behavior of rapidly solidified and processed aluminum alloys," in Light Weight Alloys for Aerospace Applications, edited by E.W. Lee, K. V. Jata, N. H. Kim and W. E. Frazier, The Minerals, Metals and Materials Society, 1995, p319.
    5. R. S. Mishra, W. B. Lee, A. K. Mukherjee and Y-W. Kim, "Mechanism of superplasticity in gamma TiAl alloys," in International Symposia on Gamma Titanium Aluminides, edited by Y-W. Kim, R. Wagner and M. Yamaguchi, (TMS 1995), p571.
    6. R. S. Mishra and A. K. Mukherjee, "Effects of additives on plasma activated sintering of nanocrystalline alumina," Advances in powder metal and particulate materials - 1995, edited by M. Phillips and J. Porter, MPIF and APMI, 1995, p7-161.
    7. R. S. Mishra and A. K. Mukherjee, "The origin of high strain rate superplasticity in powder metallurgy aluminum alloys," Advances in powder metal and particulate materials - 1995, edited by M. Phillips and J. Porter, MPIF and APMI, 1995, p10-155.

    1994 back to top

    1. T. R. Bieler, R. S. Mishra and A. K. Mukherjee, "The role of threshold stresses and incipient melting in high strain rate superplasticity," Materials Science Forum, 170-172 (1994) 65.

    1993 back to top

    1. R. S. Mishra and A. K. Mukherjee, "Recent advances on superplastic metals and metal based composites," 3rd Japan International SAMPE Symposium, (1993) 864.
    2. R. Sundaresan, R. S. Mishra, T. Raghu, A. G. Paradkar and M. C. Pandey, "Steady state creep behaviour of a mechanically alloyed Al-9wt% Ti alloy," 2nd International Conference on Structural Applications of Mechanical Alloying, (1993) 221.
    3. D. Banerjee, A. K. Gogia, T. K. Nandy, K. Muraleedharan and R. S. Mishra, Structural Intermetallics, Edited by R. Darolia, J. J. Lewandowski, C. T. Liu, P. L. Martin, D. B. Miracle and M. V. Nathal, The Minerals, Metals and Materials Society, 1993, p. 19.

    Citation Information back to top

     
    Total Articles in Publication List: 236   Average Citations per Article: 24.05
    Articles with Citation Data: 236   h-index: 39
    Sum of the Times Cited: 5676   Last Updated: 1/28/2013
    For more information and publication listings, visit ResearchID.
  • Professional Experience

    2011 - present Professor, UNT

    Jan. 2009 - present Curators' Professor, Missouri S&T

    Sept. 2006 - Dec. 2008 Professor, Missouri S&T

    Sept. 2003 - Aug. 2006 Associate Professor, Missouri S&T

    Aug. 1999 - Aug. 2003 Assistant Professor, Missouri S&T

    July 1997 - July 1999 Adjunct Assistant Professor, UC-Davis

    March 1994 - June 1997 Post Graduate Research Associate, UC-Davis

    1989 - 1994 Group Leader, Creep Group, DMRL, Hyderabad, India

    1993 - 1994 Project Leader, DMRL, Hyderabad, India

    Fall 2008 Visiting Faculty, UI-UC

    Professional Affiliations

     

    The Minerals, Metals and Materials Society (TMS)

          Vice-chair (2010-2013) of TMS Structural Materials Division Council

          Member, Energy Materials Innovation Impact Team (Materials Integration in

               Clean Energy Systems)

          Past Chair (2002-04) of the joint ASM/TMS Committee on

                Mechanical Behavior of Materials

          Member, TMS Shaping & Forming Committee, TMS Powder Materials Committee

    American Society of Metals (ASM)

          Past Vice-Chair of the Nanomaterials Task Force

          Past Member of New Products and Services Committee

    American Welding Society

    Life Member of Materials Research Society of India

  • Honors and Awards
    • 2010 - Co-recipient of Alexander Schwarzkopf Prize for Technological Innovation 
                 awarded to the Center for Friction Stir Processing by NSF-IUCRC Directors 
                 Association
    • 2009 - Fellow, ASM International
    • 2008 - Curators’ Professor
    • 2007 - Faculty Excellence Award, University of Missouri - Rolla
    • 2007 - ASM-IIM Visiting Lecturer, ASM International
    • 2006 - Faculty Excellence Award, University of Missouri - Rolla
    • 2005 - Faculty Excellence Award, University of Missouri - Rolla
    • 2005 - Outstanding Graduate Faculty of SoMEER, Council of Graduate Students, 
                  University of Missouri - Rolla
    • 2005 - Sustained Teaching Excellence, SoMEER, University of Missouri - Rolla
    • 2004 - Faculty Excellence Award, University of Missouri - Rolla
    • 2003 - Faculty Excellence Award, University of Missouri - Rolla
    • 2003 - Dean’s Award for Innovation in Teaching, Honorable mention, SOMM-UMR
    • 2002 - Faculty Excellence Award, University of Missouri - Rolla
    • 2002 - Ranked 148 among researchers in Materials Science worldwide (ISI
                 Essential Science Indicator database in Oct. 2002 based on citation of 
                 journal papers)
    • 2002 - Listed in Marquis Who’s Who in America
    • 2001- Faculty Excellence Award, University of Missouri - Rolla
    • 2001 - Faculty Performance Shares, University of Missouri
    • 1993 - Young Metallurgist Award from the Indian Institute of Metals, India.
    • 1993 - Associate of the Indian Academy of Sciences, India.
    • 1988 - Brunton Medal for the best Ph.D. dissertation in the School of Materials from the
                 University of Sheffield, UK
    • 1985-1988 - Firth Pre-doctoral Scholarship from the University of Sheffield, UK
    • 1985-1988 - ORS Award from the Committee of Vice-Chancellors and Principals of UK
  • Groups
    Center for Advanced Non-Ferrous Structural Alloys (CANFSA)Center for Friction Stir Processing (CFSP)ResearcherIDInnovative Materials and Processes (IMAP)